TachoPro (OBD2 ISO9141 Interface + TachoPro dongle integrated)
This compact interface will allow you to easily read/write/modify the mileage/km on your car without the need to remove the dash. It connects to the on-board diagnostics port located in your car.
This kit will also allow you to use it as a diagnostic ISO9141 compatible interface. (See OBD2 diagnostic cable specification for details)
This tool is used daily by engineers all over the world and is very effective. The software is DOS based and in german, but very easy to use.
A laptop or PC is required, note that on very fast ones over 233 MHZ the software might not work.
- Interface is based on certified ISO9141 Bus Transceivers and RS232 level shifters
- K-Line & L-Line (K/L Interface)
- Bi-Colour status LED`s for K-Line & L-Line
- Power LED
- Powered from car battery over service cable
- Service cables for BMW, Mercedes Benz and Volkswagen included
- Comfortable service cable length of 2,00 metres
Other Information :
1. The TachoPro software might not work on PC`s that are faster than 233 MHZ
2.Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside so the tachopro software is possible to run and manipulate the mileage
3. Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell
4. Scantool, scanmaster, digimoto are using another interface based on ELM interpreter chips and are not compatible to this interface (Of this ELM interpreter chips exist 3 pieces with different protocols)
5. For further dashboard problem, check pls. from what manufacturer your combi instrument is made, VDO(Siemens), Motometer or Magneti. The Tachopro can only work for Polo on the one made from Motometer
6. Tachopro supports cars up to 1999 sometimes to 2001 (from model to model)
7. It can make the full EEPROM backup of the techopro, only the EEPROM from the IC
1.- Main Screen
- AUDI A3/A4/A6 new VDO
- AUDI A4 old VDO without FIS
- AUDI A4 old VDO with FIS
- AUDI A6 old VDO
- AUDI A8 VDO previous to 10/96
- AUDI A8 VDO posterior a 11/96
- AUDI TT
- BMW E36
- BMW E38/E39 High level until SW15
- BMW E38/E39 low level until SW15
- BMW E38/E39 High level Model 99
- FORD Galaxy
- MERCEDES W140/W129 until 6/96 by combo connector
- MERCEDES Clase A by diagnostics connector
- MERCEDES Clase M by diagnostics connector
- MERCEDES Sprinter, Clase V by combo connector
- SEAT Alhambra
- SEAT Arosa
- SKODA Oktavia
- VW Golf, Passat, Bus T4 VDO
- VW Golf A4 Modelo 2000
- VW Passat B5 Magneti Marelli
- VW Golf 4, Polo, Lupo Motometer
- VW Sharan Magneti Marelli
- VW New Beetle Magneti Marelli
- Interface Tachopro version V2.00
- Serial Cable RS232.
- SAE Cable J1962 to DB9.
- BMW Cable 20 pin to DB9.
- Mercedes Cable 38 pin a DB9.
- TachoPro Software
Incoming search terms:
- man-cats 1 (iso 9141-interface
- tacho pro sidisi
- tachopro seat