I-Pmart Universal Box 2 in 1 Device - Without Cables

Remark:
1. For the pinouts configuration, please kindly visit from the schematic diagram of the different datacables respectively in order to determine if there is right for the sw used or contact our recommended source shown at left hand side.
2. No AC/DC transformer incl. in the unibox. User can try with the private owned power supply or a 9V battery cell with the external power stabilizer.


Operating Instructions:
Pinout of the RJ45 jacket:
1 = Switchable 5V Flash Supply
2 = TX (output, data to phone)
3 = RX (input, data from phone)
4 = RTS (output, data to phone)
5 = CTS (input, data from phone)
6 = M/C-BUS (bi-directional 1 wire bus)
7 = GND
8 = GND

Pinout of the RJ48 jacket:
1 = DCD (input)
2 = RxD (input)
3 = TxD (output)
4 = DTR (output)
5 = GND
6 = DSR (input)
7 = RTS (output)
8 = CTS (input)
9 = RI (input)
10 = +5V

(DCD & RxD are internally connected)
Connect the box to your PC and connect the power supply to it, the Power LED will light up as soon as you have connected it. Choose now the operating mode and connect the phone cable and the phone.


IMPORTANT
Please download the driver from here




Package Contains

1 X i-Pmart Universal Box 2in1