Spanish version
Spanish version
|
Welcome visitor login/register Today is November 29, 2009 | Intuitive search |
Newsletter
Kingston HyperX PC8500 DDR2 1066MHz Memory (1GB x 2) - KHX8500D2K2/2GProduct reference: KINGSTON-HYPERX-PC850-R32911 |
|||||||||||||||||||||||||||||||||||||||
See more products in the category at DDR2 |
|||||||||||||||||||||||||||||||||||||||
 Description:
|
|||||||||||||||||||||||||||||||||||||||
|
Kingston's 128M x 64-bit 1GB (1024MB) DDR2-1066 CL5 SDRAM (Synchronous DRAM) memory module, based on sixteen 64M x 8-bit DDR2 FBGA components. This module has been tested to run at DDR2 1066MHz at a latency timing of 5-5-5-15 at 2.2V. The SPD is programmed to JEDEC standard latency 800Mhz timing of 5-5-5-15 at 1.8V. This 240-pin DIMM uses gold contact fingers and requires +1.8V. Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V Double-data-rate architecture; two data transfers per clock cycle Bidirectional data strobe(DQS) Differential clock inputs(CK and CK) DLL aligns DQ and DQS transition with CK transition Programmable Read latency 5 (clock) Burst Length: 4, 8 (Interleave/nibble sequential) Programmable Burst type (sequential & interleave) Timing Reference: 5-5-5-15 at +1.8V / 5-5-5-15 at +2.2V Edge aligned data output, center aligned data input Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh) Serial presence detect with EEPROM High Performance Heat Spreader PCB : Height 1.180” (30.00mm), single sided component Specifications | |||||||||||||||||||||||||||||||||||||||
Calculate shipping cost
