Diagnostic cable for ISO9141/KWP2000 transmission protocol

- Heavy & robust casing for rough service use
- Connects to PC via RS232
- Working for ISO9141/KWP2000 protocol
- Cable is based on certified ISO9141 Bus Transceivers and RS232 level shifters
- Bi-colour led for each K-line which shows the current logic status
- Powered from car battery over OBD2 connector
- Comfortable cable length of 2,00 metres

Compatibility:

This cable is applicable to the 1996 to 2005 VW/AUDI/SEAT/SKODA cars with  K/L and single K line modes, except vehicles with CAN-BUS modes.

The diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
- Volkswagen
- Audi
- Skoda
- Seat

Important features:

1. This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
(There are 4 different bus systems under the OBD2 standard ISO/KWP, VPW, PMW and CAN)
2. K = Communication Line (A bidirectional halfduplex communication line)
3. L = Ignition Line for waking up the ECU (ECU = Engine Control Unit)

VAG-COM shareware download: VAG-COM

Applications of the VAG-COM Release 409.1 

• Module Version - identify the control module part number and coding version

• DTC Memory - read and reset manufacturer diagnostic trouble codes

• Actual Values - access live data

• Activation - selected components can be activated

• Code Module - code new control modules (most models through 2002)

• Adaptation - read/reset Service Light parameters, view/change block learn values

• Basic Settings - view and change control module default settings (Excluding 1.8T 01 and newer)

• Individual Values - read individual measuring values

• Readiness Code - Check status of applicable emissions related systems

• Remote Control Programming - program Radio Frequency keys

• Key Matching - match keys to Immobilizer control module (5 digit)