The Samsung spinpoint F1 series, HD502IJ hard disk featured 500GB capacity, SATA interface, 16MB buffer size and 7200RPM rotational speed. Serial ATA 3.0Gbps interface support
Advanced dynamic FOD control for best data integrity
SATA native command queuing feature
Staggered spin-up support
Improved performance with dual-ARM based firmware
ATA automatic acoustic management feature
ATA device configuration overlay feature
SilentSeek
Improved recording stability over temperature with PMR
Intelligent compensation of external disturbance
Device initiated SATA power management
Environment friendly product with RoHS compliance
ATA S.M.A.R.T. compliant
ATA 48-bit address feature
NoiseGuard
* *Sales package content and specifications may vary and might change without notification.Specifications Capacity
: 500GB
Interface
: Serial ATA 3.0Gbps
Buffer DRAM Size
: 16MB
Byte per Sector
: 512 bytes
Rotational Speed
: 7,200RPM
Average Latency
: 4.17ms
Average Seek time(typical)
: 8.9ms
Media Transfer Rate(Max.)
: Buffer to/from Host (Max) :300MB/sec Media to/from Buffer (Min/Max) :175MB/sec
Drive Reday Time(typical)
: 12sec
Non-recoverable Read Error
: 1 sector in 10^15 bits
Start/Stop Cycles
: 50,000
Idle
: 2.70Bel
Performance Seek
: 2.90Bel
Temperature
: Operating :0 ~ 60°C Non-operating : -40 ~ 70°C
Humidity(non-condensing)
: Operating : 5 ~ 90% Non-operating : 5 ~ 95%
Linear Shock(1/2 sine pulse)
: Operating : 70GNon-operating : 300G
Altitude(relative to sea level)
: Operating : -300 to 3,000m Non-operating : -300 to 12,000m
Voltage
: +5V ± 5%, +12V ± 10%
Spin-up Current(Max.)
: 2.3A
Seek(typical)
: 6.9W
Read/Write(typical)
: 6.9W
Idle(typical)
: 5.7W
Standby(typical)
: 0.7/1W
Sleep(typical)
: 0.7/1W
Dimension (HxWxL)
: 26.1 x 101.5 x 147 mm
Weight(avg.)
: 610g
|