USB Diagnostic cable 4.09 KKL OBD2 for Volkswagen,Audi,Skoda,Seat

• Volkswagen
• Audi
• Skoda
• Seat

Features:
With this cable & the right software you are able to read/erase error codes and access all devices inside the car which are connected to the service bus. (Such as radio, airbag, dashboard, ABS, ECU, etc.) So it`s the perfect electronic diagnostic system to detect, locate and repair errors !

Specification:

• Connects to PC via USB
• Working for ISO9141/KWP2000 protocol
• Cable is based on certified ISO9141 Bus Transceivers and USB level shifters
• 2 K-Line`s & L-Line (KKL Interface)
• Because of it`s 2 K-Line`s it can also communicate with devices on 2nd K-Line on very new cars like latest Audi model`s
• Bi-Colour status LED`s for both K-Line`s
• Powered from car battery over OBD2 connector
• Comfortable cable length of 2,00 metres

Remark:

1. This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
2. Terminal K = Bus of communication
3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only
6. Supported also ISO9141 protocol